Turbocharger - BA09.40-P-1000-01P
ENGINE 651
TURBOCHARGER
| Number | Designation | Engine 651 | ||
|---|---|---|---|---|
| BA09.40-P-1001-01P | Flange connection, exhaust manifold to exhaust gas turbocharger | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 90 | ||
| BA09.40-P-1002-01P | Bolt, turbocharger bracket to rear/center to turbocharger | Nm | 20 | |
| BA09.40-P-1003-01P | Bolt, bracket for rear/center exhaust gas turbocharger to crankcase | Nm | 20 | |
| BA09.40-P-1004-01P | Bolt for oil line bracket | Nm | 9 | |
| BA09.40-P-1005-01P | Banjo bolt, oil line to turbocharger | Stage 1 | Nm | 9 |
| Stage 2 | ∠° | 90 | ||
| BA09.40-P-1006-01P | Bolt, oil line to crankcase | Nm | 9 | |
| BA09.40-P-1007-01P | Bolt, turbocharger bracket to turbocharger bypass flap | M6 | Nm | 9 |
| BA09.40-P-1008-01P | Bolt, turbocharger bracket to engine support/major assembly carrier | M8 | Nm | 20 |
| BA09.40-P-1009-01P | Connection for oil lines | Nm | 18 | |
| BA09.40-P-1010-01P | Bolt, oil return line to crankcase/turbocharger | Nm | 9 | |
| BA09.40-P-1011-01P | Bolt, oil return line to turbocharger bracket | M8 | Nm | 20 |
| BA09.40-P-1012-01P | Nut, vacuum unit to turbocharger | M6 | Nm | 9 |
| BA09.40-P-1013-01P | Bolt, bracket for vacuum cell to exhaust gas turbocharger | Nm | 25 | |
| BA09.40-P-1014-01P | Bolt, turbocharger low pressure to turbocharger high pressure | Stage 1 | Nm | 20 |
| Stage 2 | 90 | |||
| BA09.40-P-1015-01P | Bolt, flanged pipe to bypass flap | Nm | 9 | |
| BA09.40-P-1016-01P | Bolt, bypass flap to turbocharger | Nm | 9 | |
| BA09.40-P-1017-01P | Bolt, turbocharger bracket to bypass flap/air duct housing | Nm | 9 | |
| BA09.40-P-1018-01P | Bolt, turbocharger retaining bracket to turbocharger/bearing bracket | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 90 | ||
| BA09.40-P-1019-01P | Bolt, bracket for exhaust gas turbocharger to exhaust gas turbocharger/crankcase | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 90 | ||