Remove/Install Coolant Pump Switchover Valve - AR20.10-P-3000GQ
ENGINES 651 in MODEL 166, 172
| Remove/install | |||
| Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | AS00.00-Z-0011-01A | |
| 1 | Remove engine trim panel | ||
| 2 | Remove poly-V belt cover | ||
| 3 | Disconnect electrical connector (1) on the coolant pump switchover valve (Y133) | ||
| 4 | Detach vacuum hoses (2) | ||
| 5 | Release and detach coolant pump switchover valve (Y133) on retaining tab (3) | ||
| 6 | Install in the reverse order |