Remove/Install Park Pawl Battery - AR54.10-P-0121GQ

MODEL 166 up to model year 2016

except CODE B03 (ECO start/stop function)

except CODE ME05 (HYBRID DRIVE 80KW VARIANT (INCLUDING PLUGIN))

Shown on model 166.024

G12079406

	Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries	No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on battery		AH54.10-P-0001-01A
	Notes on AGM battery		AH54.10-P-0002-01A
	Remove/install
1	Switch off ignition and keep transmitter key at a location beyond transmitter range (at least 2 m)
2.1	Remove right side of panel in trunk	Model 166.0 up to model year 2016 except code B03 (ECO start/stop function) except code ME05 (HYBRID DRIVE 80KW VARIANT (INCLUDING PLUGIN))	AR68.30-P-4800GQ
2.2	Remove spare tire well panel	Model 166.8 up to model year 2016 except code B03 (ECO start/stop function) except code ME05 (HYBRID DRIVE 80KW VARIANT (INCLUDING PLUGIN))	AR68.30-P-4620GQ
3	Separate electrical connections (1)
4	Unscrew nut (2)
5	Remove bracket (3)
6	Remove additional battery (G17)
7	Install in the reverse order