Prepare Front Glass Cover Body Flange For Installation - AR77.21-P-7010-02GQ
MODEL 166 with CODE 413 (Automatic panoramic sliding sunroof)
| Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
MODIFICATION NOTES
| 18.04.2018 | Notes on removal/installation of bonded elements of the panoramic roof added. |
- Cut back adhesive beads on the bonding surfaces (1) to a residual height of approx. 1 mm to a maximum of 2 mm and do not completely detach cut off residual pieces of the adhesive beads.
A maximum of 2 mm of the adhesive beads may remain.
- Check panorama roof frame for paint damage.
If there is a problem,
↓
Repair paint damage on panorama roof frame.
- Apply primer to the bonding surfaces (1).
Only on the bonding surfaces (1) on which no adhesive material residues are present.