Boost Pressure Control Flap Actuator, Basic Function - GF09.50-P-2001A

ENGINE ALL (CAR) 

Overview 

This document contains information on: 

• Location 
• Task 
• Structure 
• Function 

Location 

The boost pressure control flap actuator is directly located on the exhaust gas turbocharger.

Task 

The boost pressure control flap actuator regulates the exhaust gas turbocharger boost pressure.

Structure 

A DC motor, an induction-type sensor and an actuator housing are accommodated in the housing of the boost pressure control flap actuator.

Function 

Boost pressure control is implemented by means of a continuous adjustment (adjustment angle of between 0 and 109°) of the boost pressure control flap. In exhaust gas turbochargers with variable turbine geometry, the guide vanes are adjusted via the boost pressure regulator. The boost pressure control flap actuator as well as the boost pressure regulator are actuated via the combustion engine control unit by means of a pulse width modulated signal. The positioning travel of the actuator motor is determined via an integrated, inductive sensor.

	Components
	Boost pressure control flap actuator, detailed information	Engine 282	GF09.50-P-2500B
		Engine 260	GF09.50-P-2500A