Remove/Install Inertization Cartridge - AR86.10-P-0106GQA

MODEL 166, 292 with ENGINE 157, 276, 278 with CODE 2U8 (Alternative refrigerant) 

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical components to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such components.	AS91.00-Z-0008-01A
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Information, assessment and legal requirements when working with, handling and storing pyrotechnical components		AH91.00-Z-0000-10A
	Remove/install
1	Disconnect ground line from battery		AR54.10-P-0003GZ
2	Remove rear section of right front fender liner		AR88.10-P-1321GQC
3	Release and disconnect electrical connection (2)
4	Loosen clamp (3)
5	Disconnect inertization line (5) from inertization system cartridge (1)
6	Unscrew nuts (6)
7	Unscrew bolt (4)
8	Remove inertization system cartridge (1) with bracket
9	Install in the reverse order