Remove/Install Panoramic Sliding Roof Motor - AR77.21-P-6995GQ
MODEL 166 with CODE 413 (Automatic panoramic sliding sunroof)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Loosen headliner in front area up to B-pillars | MODEL 166 with CODE 413 (Automatic panoramic sliding sunroof) with CODE Z05 (B5 armoring on special protection version) | AR68.30-P-4300GQS |
| MODEL 166 with CODE 413 (Automatic panoramic sliding sunroof) without CODE Z05 (B5 armoring on special protection version) | AR68.30-P-4300GQ | ||
| 2 | Lower headliner and disconnect electrical connector (4) on panoramic sliding sunroof control module (A98) | Carefully lower headliner. Headliner can be damaged. |
|
| 3 | Lower headliner and unscrew bolts (3) | Carefully lower headliner. Headliner can be damaged. |
|
| 4 | Remove panoramic sliding roof control module (A98) | ||
| 5 | Install in the reverse order | ||
| 6 |
Perform teach-in run for anti-trap safeguard and normalization of panoramic sliding roof Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A |