Apply Adhesive Material For Rear Glass Roof - AR77.21-P-0600-03SX
MODEL 166, 207.3, 212, 221.1 with CODE 413 (Automatic panoramic sliding sunroof)
| Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
MODIFICATION NOTES
| 10.04.2018 | Notes on removal/installation of bonded elements of the panoramic roof, added. |
Shown on model 221.1
- Guide application nozzle on the bonding surfaces (1, 2) along the body flange thus pressing out adhesive uniformly.
- Carefully remove contamination caused by adhesive immediately.
Only if necessary.
- Completely squeeze out excess adhesive from cartridges immediately after applying adhesive and dispose of it properly.