Multicontour Seat Pneumatic Pump, Basic Function - GF91.25-P-2005A

Model all (CAR) 

with code 399 (Front multicontour seat with massage function) 

Model all (CAR) 

with code 406 (Rear multicontour seat) 

Model all (CAR) 

with code 409 (Left and right front multicontour seat) 

Model all (CAR) 

with code 432 (Dynamic seats left and right) 

General 

The multicontour seat pneumatic pump provides the multicontour seat control unit with the air supply for filling the air cushions.

Function requirements 

• Circuit 30t ON

Variants 

The local multicontour seat pneumatic pump is located in the armrest of each seat. It provides the air supply for this seat.

The central pneumatic pump is located away from the seats in the trunk. It provides the air supply for several seats. The central pneumatic pump is connected to the vehicle's network architecture.