Remove/Install Right Boost Pressure Sensor Downstream Of Throttle Valve - AR09.41-P-1031MNG
Engine 177 in model 253
Fig 1: Right Pressure Sensor Downstream of Throttle Valve (B28/23) Components Location - Engine 177 in Model 253
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. | AS00.00-Z-0017-01A | |
| Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | ||
| Remove/install | |||
| 1 | Remove charge air cooler | AR09.41-P-6828MNG | |
| 2 | Remove screw/bolt (1) | *BA09.41-P-1005-01X | |
| 3 | Turn pressure sensor downstream of right throttle valve (B28/23) clockwise and remove | ||
| 4 | Seal opening with suitable stop plug | Fig 2 | |
| 5 | Install in the reverse order |
CHARGE AIR LINE/CHARGE AIR COOLING
| Number | Designation | Engine 177 | |
|---|---|---|---|
| BA09.41-P-1005-01X | Bolt, boost pressure sensor upstream/downstream of throttle valve | Nm | 6 |