Revitalization, Basic Function - GF82.90-P-9900A
Model all (CAR)
with code 241 (Left electrically adjustable driver seat with memory function)
with code 275 (Memory package)
Model all (CAR)
with code 241 (Memory switch for electrically adjustable front passenger seat, left)
with code 275 (Driver's seat, electrically adjustable with memory function)
Model all (CAR)
with code 242 (Front passenger seat, electrically adjustable with memory function)
with code 275 (Driver's seat, electrically adjustable with memory function)
Model all (CAR)
with code 242 (Right electrically adjustable driver seat with memory function)
with code 275 (Memory package)
Model all (CAR)
with code P72 (ENERGIZING comfort control)
Model all (CAR)
with code PBP (ENERGIZING package)
Model all (CAR)
with code PBR (ENERGIZING package Plus)
Overview:
This document contains information on:
- Seat kinetics
- Comfort control
- Comfort control assistant
General
The revitalization functions should enhance the well-being and health of the vehicle occupants. The revitalization functions actuate the following systems for this such as, e.g. seats, seat heating, air conditioning system and the multimedia system.
Function requirement
- Circuit 15R ON
Seat kinetics
The function is available for vehicles with one of the following special equipment elements:
- Code 241 (Left electrically adjustable driver's seat with memory function)
- Code 241 (Memory switch for electrically adjustable front passenger seat, left)
- Code 242 (Electrically adjustable front passenger seat with memory function)
- Code 242 (Right electrically adjustable driver's seat with memory function)
Seat kinetics use minor movements of the seat cushion and seat backrest to increase or ease the strain on muscles and joints. To do so, the seat control unit adjusts the seat cushion and seat backrest inclination cyclically by a few degrees in both directions around the configured seat position. If the seat kinetics function moves the seat backrest forward, the seat cushion moves up at the same time and vice versa.
On vehicles with multicontour seat, the seat kinetics function also actuates the lumbar support in cyclical movements.
The system is operated through the multimedia system.
Comfort control
For vehicles with code P72 (ENERGIZING comfort control), with code PBP (ENERGIZING package) or with code PBR (ENERGIZING package plus).
Comfort control combines several comfort functions and groups them into programs. The programs support the driver, for example, in monotonous driving situations with the aid of energizing programs and, in emotionally-stressful situations, with relaxing programs.
The function is controlled by the multimedia system control unit.
To implement the programs, comfort control actuates the following systems depending on the equipment installed and the selected program:
- Ambiance illumination
- Multicontour seat massage function
- Air conditioning system including fragrancing/ionization
- Armrest heating
- Steering wheel heater
- Seat climate control
- Media display (screen animations)
- Speaker system (music output)
The system is operated through the multimedia system. The comfort control system contains the following programs:
Overview of actuated program functions
| Program/actuated functions | Freshness | Vitality | Training | Warmth | Joy | Comfort | Power Nap |
|---|---|---|---|---|---|---|---|
| Screen animation | X | X | X | X | X | X | X |
| Music output | - | X | - | - | X | X | X |
| Climate control | X | - | - | - | - | - | - |
| Fragrancing/ionization | X | X | X | X | X | X | X |
| Ambiance illumination | X | X | X | X | X | X | X |
| Seat ventilation | X | X | - | - | - | - | - |
| Seat heater | - | - | - | X | - | X | - |
| Armrest heating | - | - | - | X | - | - | - |
| Steering wheel heater | - | - | - | X | - | - | - |
| Massage | - | X | - | - | X | X | X |
Comfort control assistant
The function is available for vehicles with code 362 (HERMES LTE) and one of the following special equipment elements:
- Code PBP (ENERGIZING package)
- Code PBR (ENERGIZING package plus)
Requirements:
- The service is activated in the web portal.
The comfort control assistant evaluates the driving dynamics and driver situation and recommends programs for comfort control. The comfort control assistant evaluates the following vehicle data:
- Driving time
- Driving time
- Weather conditions
The vehicle data are transferred via the telematics services control unit to the Daimler-Vehicle-Backend (DaiVB). There, the program recommendations are determined from the data and displayed via the notification center in the vehicle.
The comfort control assistant also supports the evaluation of data from several fitness trackers. To do this, the account of the fitness tracker must be linked with the Mercedes me account. The comfort control assistant then evaluates sleeping quality and pulse rate alongside the vehicle data.
If a fitness tracker is connected, the comfort control assistant allows the pulse rate to be shown on the multimedia system display. For this, the data are transferred via the customer's mobile phone via Bluetooth® to the multimedia system control. This function is only available while driving. The data is cleared in the vehicle as soon as the ignition is switched off or a door is opened.
| Further basic functions | |||
| Ambient lighting, basic function | Vehicles with code 876 (Ambient lighting) or with code 877 (Ambient lighting) | GF82.20-P-9901A | |
| Multimedia system control, basic function | GF82.85-P-9904A | ||
| Climate control, basic function | GF83.00-P-9901A | ||
| Comfort heating, basic function | All models (cars) with code 443 (Steering wheel heater) or with code 906 (Front armrest heater) | GF83.20-P-9900A | |
| Fragrance system, basic function | All models (cars) with code P21 (Air quality package) | GF83.80-P-9900A | |
| Ionization, basic function | All models (cars) with code P21 (Air quality package) | GF83.80-P-9901A | |
| Front seat electrical seat adjustment, basic function | All models (cars) with code 241 (Left electrically adjustable driver's seat with memory function), with code 241 (Memory switch for left electrically adjustable front passenger seat), with code 242 (Right electrically adjustable driver's seat with memory function) or with code 242 (Electrically adjustable front passenger sea with memory function), | GF91.10-P-9900A | |
| Multicontour seat, basic function | All models (cars) with code 399 (Front multicontour seats with massage function) or with code 409 (Left/right front multicontour seats) | GF91.25-P-9900A | |
| Seat climate control, basic function | All models (cars) with code 401 (Seat climate control for driver and front passenger), with code 873 (Seat heating for driver and front passenger) or with code 902 (Seat heating Plus for driver and front passenger) | GF91.30-P-9902A |