Manual Interior Lighting Control, Basic Function - GF82.20-P-1000A
Model all (CAR)
General
The manual interior lighting control makes it possible to switch the interior lighting and reading lights on and off.
The following lamps can be actuated while doing so:
- Reading lamps
- Dome lamp
- Interior lights
Manual interior lights control
The user can switch the interior lighting on and off as follows:
- With the corresponding button for the illumination
- Via the voice control (only driver/front passenger reading lamps, interior light in rear passenger compartment)
- Gesture detection system (vehicle with gesture detection system) (only driver/front passenger reading lamps)
The manually switched on illumination is automatically switched off:
- 30 min after circuit 15 off
- When locking the vehicle via the central locking
If the energy management detects a hazard to the starting capability, the interior lighting is deactivated in accordance with the consumer shutoff strategy.
| Further basic function | |||
| Gesture recognition system, basic function | Model all (CAR) with code 77B (Contactless gesture control at front) |
GF82.90-P-9901A | |
| Function schematics | |||
| Function schematic for manual interior lighting control | Model 177 | PE82.20-P-2501-97A | |
| Model 167 | PE82.20-P-2501-97B | ||
| Model 118, 247 | PE82.20-P-2501-97C | ||
| Model 293 | PE82.20-P-2501-97D |