Automatic Dimming Of Mirror Glass Of Outside Mirror, Basic Function - GF88.79-P-1000A
Model all (CAR)
with code 249 (Automatically dimming mirrors)
Overview
This document contains the following information:
- General
- Function requirement
- Dimming mirror glass of outside mirror
General
The mirror glass of the outside mirror of the driver's side can be continuously variably dimmed by means of an electrolyte gel. As a result, a dazzling due to light sources in the field of vision of the outside mirror can be prevented.
Function requirement
- Circuit 15R ON
Dimming mirror glass of outside mirror
The electrolyte gel of the mirror glass is actuated by the driver's door control unit depending on the inside rearview mirror request. The crystals of the electrolyte gel react to the control voltage, align themselves in a specific angle and thus darken the mirror glass. Dimming is canceled if the interior lighting is switched on or reverse gear is engaged.
| Function schematics | |||
| Function schematic for automatic dimming of mirror glass of inside and outside mirrors | Model 118, 177, 247 with code 249 (Automatically dimming mirrors), Model 167 with code 249 (Automatically dimming mirrors) Model 293 with code 249 (Automatically dimming mirrors) | PE88.79-P-2501-97A | |
| Subsystems | |||
| Inside rearview mirror dimming, basic function | GF68.49-P-9900A | ||
| Control units | |||
| Front door control unit, basic function | GF72.29-P-9891A | ||
| Components | |||
| Outside mirror, basic function | GF88.79-P-2014A |