Wifi Hotspot, Basic Function - GF82.85-P-1004A

Model all (CAR) 

with code 547 (Connect 20 Entry (NTG6)) 

Model all (CAR) 

with code 548 (Connect 20 MID (NTG6)) 

Model all (CAR) 

with code 549 (Connect 20 HIGH (NTG6)) 

General 

The WiFi hotspot function makes it possible to use the Internet wirelessly in the vehicle using mobile terminals. The function is provided by multimedia system control.

Function requirements 

• The WiFi function is activated in the multimedia system and the WiFi hotspot is configured.
• Multimedia system control is connected to the Internet.

To use the function in Mercedes me countries, data volume must be purchased from the mobile network provider or there must be a telephone control unit installed.

Function 

Multimedia system control acts as a WiFi access point to exchange data with mobile terminals via the WiFi antenna and routes the signals to the Internet.

There are the following options for establishing connections to the WiFi hotspot:

• WPS pin (entering a pin on the mobile device or in the multimedia system)
• WPS PBC (pressing a button on the mobile device)
• Security key (entering a security key on the mobile device)
• Near Field Communication (NFC)

The multimedia system supports WiFi standard IEEE 802.11ac and all older standards.

The WPA2 encryption standard is used for the WiFi hotspot. In China, WAPI is also supported.