Heat Spray Nozzles And Spray Nozzle Hose, Basic Function - GF82.35-P-9901A

Model all (CAR) 

with code 874 (MAGIC VISION CONTROL, heated) 

Model all (CAR) 

with code 875 (Heated windscreen washer system) 

General 

Heating of the spray nozzles and spray nozzle hose prevents the washer fluid from freezing in the spray nozzle hose and the spray nozzles or thaws it out again.

Function requirement 

• Engine running or drive train operational

Heat spray nozzles and spray nozzle hose 

Heating of the spray nozzles and the spray nozzle hose is switched on at an outside temperature of less than 5°C.

During windshield washing, the heating is switched off. The heating is switched on again 5 s after the washing is finished.

If the outside temperature rises to above 8°C, the heating is switched off.

The heating of the spray nozzles and the spray nozzle hose is switched off for an undervoltage event on the on-board electrical system by the energy management by means of consumer reduction.

	Function schematics
	Function schematic, heat spray nozzles and spray nozzle hose	Model 118, 177, 247 with code 875 (Heated windscreen washer system), Model 167 with code 874 (MAGIC VISION CONTROL, heated), Model 167 with code 875 (Heated windscreen washer system), Model 293 with code 875 (Heated windscreen washer system)	PE82.35-P-2500-97A
	Further basic functions
	Reduce consumers, basic function		GF54.10-P-1011A
	Control units
	Central controller unit, basic function	Model 118, 177, 247 with code 875 (Heated windscreen washer system)	GF54.21-P-9895A
	Front central controller unit basic function	Model 167 with code 874 (MAGIC VISION CONTROL, heated) Model 167 with code 875 (Heated windscreen washer system) Model 293 with code 875 (Heated windscreen washer system)	GF54.21-P-9896A
	Components
	Spray nozzle hose heater, basic function		GF82.35-P-2000A