Wiring diagram for drive train sensor CAN - PE00.19-P-2171IAA
MODEL 117, 156, 176, 246 with ENGINE 270 with CODE 920 (Direct petrol injection with stratified charging) Potential distributor X30/38 (CAN I)
MODEL 117, 156, 176, 246 with ENGINE 651 with CODE 927 (EU6 emissions standard) Potential distributor X30/38 (CAN I)
MODEL 242.848 Potential distributor X30/38 (CAN I)
| Wiring diagram for drive train sensor CAN | PE00.19-P-2171-97IAA | ||
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-P-1001-28IAA | ||
| Use of wiring diagrams | OV00.01-P-1901-03IAA | ||
| Search aid for all electrical components | OV00.01-P-1909IAA | ||
| Location and assignment of line and plug connectors | GF00.19-P-1000IAA | ||
| Location and assignment of ground points | GF00.19-P-2000IAA | ||
| Location and assignment of Z connector sleeves (wiring and plug connectors in wiring harness) | GF00.19-P-3000IAA | ||
| Fuse and relay box, as-built configuration | GF54.15-P-0800KN |