Retrofit exit and warning lamp with logo projector - AZ82.20-P-0020A

MODEL 156.9 (except 156.952) with CODE U62 (Exterior light and sight package) 

MODEL 166.0 (except 166.064/074/075) with CODE 876 (Interior Light package) except CODE 587 (Ambient lighting with projection of brand logo) 

MODEL 166.8 (except 166.874/875) with CODE 876 (Interior Light package) except CODE 587 (Ambient lighting with projection of brand logo) 

MODEL 176.0 (except 176.052) with CODE U62 (Exterior light and sight package) 

MODEL 205.0 (except 205.064/086/087/088/089), 205.1 (except 205.164), 205.2 (except 205.264/286/287/288/289) with CODE 876 (Interior Light package) 

MODEL 213.0 (except 213.064/088/089), 213.1 (except 213.164), 213.2 (except 213.264/288/289) with CODE 877 (ambient lighting) 

MODEL 246.2 with CODE U62 (Exterior light and sight package) 

MODEL 253.9 (except 253.964) with CODE 876 (Interior Light package) 

MODEL 253.9 (except 253.964) with CODE 877 (ambient lighting) 

MODEL 292.3 (except 292.374/375) with CODE 876 (Interior Light package) except CODE 587 (Ambient lighting with projection of brand logo) 

Illustrated on model 166.0 

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove
1	Remove left front door exit and warning lamp (E17/3) or right front door exit and warning lamp (E17/4)		AZ82.20-P-0020-02A
		Removed exit and warning lamp is no longer required.
		Long wedge	Fig 2
	Install
2	Install exit and warning lamp with logo projector (1)		AZ82.20-P-0020-01A
	Check
3	Perform function test	Entrance and exit illumination must be switched on at interior lamp automatic function button (N70s3) on overhead control panel control unit (N70).

Part no.	Designation	Quantity
KG 98	Exit and warning lamps with logo projector (set, 2 each)	1