Windshield washer system - inspect fluid level, adjust to correct level - AP82.35-P-8210G

MODEL 460, 461, 463 

Shown on MODEL 460, 461 except 461.302 

Fig 1: Locating Filler Neck - Shown On Model 460

Courtesy of MERCEDES-BENZ USA

Shown on model 461.302 

Fig 2: Identifying Filler Neck - Shown On Model 461.302

Courtesy of MERCEDES-BENZ USA

Shown on model 463 

Fig 3: Identifying Windshield Washer System - Shown On Model 463

Courtesy of MERCEDES-BENZ USA

	Check
	Risk of fire and explosion  caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning  caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury  or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin.	Wear protective clothing and tight-fitting safety glasses. No fire, naked flames or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children.	AS82.35-Z-0001-01A
1	Open engine hood
2	Open the cap on the filler neck (1) of the washer fluid reservoir of the windshield washer system and pour in washer fluid
	Windshield washer fluid concentrate		Windshield washer fluid concentrate. MB 371.0.
		Observe mixing ratio as per the table on the packaging of the windshield washer fluid and antifreeze.
		Filling capacity - windshield washer system	*BF82.35-P-1001-01J
3	Seal filler neck (1) with cap
4	Close engine hood