Programming of control units - AR54.21-P-0014GW
MODEL 463 as of model year 2013
Programming with XD-DVD
| Program with XD-DVD | |||
| 1 | Connect STAR DIAGNOSIS and run Xentry Diagnostics (XD) | ||
| AD00.00-P-2000-04A | |||
| 2 | Program control unit | AR54.21-P-0014-01GW | |
| 3 | Perform software calibration number (SCN) coding for control units | Only when required, refer to XD. | |
| AR54.21-P-0015GW | |||
| 4 | Run teach-in procedures | Only when required, refer to XD. | |
| 5 | Read out and erase fault memory | ||
| 6 | Disconnect Star Diagnosis | ||
| AD00.00-P-2000-04A |