Remove/Install Front Seat - AR91.10-P-1000GW

Model 463 (except 463.202/236/237/346) 

as of model year 2013 up to model year 2019/FACELIFT 2012 

Fig 1: Front Seat Components Location - Model 463 (Except 463.202/236/237/346) As Of Model Year 2013 Up To Model Year 2019/Facelift 2012

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Position front seat (1) to rear
2	Remove seat adjustment end stop (7)	Leave the front two teeth of the adjustment rail free.
3	Adjust front seat (1) to front
4	Remove cover (2) and unscrew bolt (3) from seat belt end fitting	Bolt on belt end fitting	*BA91.40-P-1001-01C
5	Remove bolts (4) from rear guide rail	Bolt, front seat (guide rail) to body	*BA91.10-P-1001-01E
6	Position front seat (1) to rear
7	Remove bolts (5) from front guide rail	Bolt, front seat (guide rail) to body	*BA91.10-P-1001-01E
8	Detach ground line from battery	Model 463 (except 463.202/234/236/237/241/242/248/346) as of model year 2013 up to model year 2019	AR54.10-P-0003GW
	Notes on battery		AH54.10-P-0001-01A
9	Carefully tilt front seat (1) toward rear
10	Disconnect electrical connectors (8) and (9)	Cut cable tie on seat console. Replace cable tie.
11	Detach pneumatics connection (6)
12	Remove front seat (1)	Check for correct position of locking bolt.
13	Install in the reverse order
14	Read out and clear the fault memory using Star Diagnosis
			AD00.00-P-2000-04A
	Check
15	Check function of multicontour seat