Remove/Install The Seat Ventilation Motors On The Front Seat Backrest - AR91.30-P-1900GW
Model 463
as of model year 2013 up to model year 2019
with code PA1 (Seat comfort package)
/FACELIFT 2012
Fig 1: The Seat Ventilation Motors On The Front Seat Backrest Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019 With Code PA1 /Facelift 2012
| Remove/install | |||
| 1 | Remove seat back lining | Model 463.242 as of model year 2013 up to model year 2019 with code PA1 (Seat comfort package) |
AR91.10-P-1910GGG |
| Model 463 (except 463.242) as of model year 2013 up to model year 2019 with code PA1 (Seat comfort package)/FACELIFT 2012 |
AR91.10-P-1910GW | ||
| 2 | Unclip electrical connector (5) for left front seat backrest seat ventilation motor (M18/10) or right front seat backrest seat ventilation motor (M18/12) | ||
| 3 | Carefully pull felt cover (4) downward | ||
| 4 | Push front seat padding (2) far enough forward until the left front seat backrest seat ventilation motor (M18/10) or right front seat backrest seat ventilation motor (M18/12) are accessible | ||
| 5 | Pull left front seat backrest seat ventilation motor (M18/10) or right front seat backrest seat ventilation motor (M18/12) from padding guide and remove upwards | ||
| 6 | Install in the reverse order |