Remove/Install Restraint Systems Control Unit - AR91.60-P-0624XG
Model 463
as of model year 2019
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Perform commissioning of SRS control unit (N2/10). | When replacing supplemental restraint system control unit (N2/10). | |
| AD00.00-P-2000-04B | |||
| 2 | Switch off ignition and store transmitter key outside of transmitter range (at least 2 m). | ||
| 3 | Detach ground line of on-board electrical system battery. | AR54.10-P-0003XG | |
| 4 | Remove radial blower. | AR83.30-P-5565XG | |
| 5 | Remove air duct. | ||
| 6 | Disconnect electrical connectors (3, 4). | ||
| 7 | Unscrew nut (1). | *BA91.60-P-1004-01B | |
| 8 | Loosen nuts (2). | *BA91.60-P-1004-01B | |
| 9 | Remove SRS control unit (N2/10). | ||
| 10 | Install in reverse order. |
AIRBAG
| Number | Designation | Model 463 up to 11/30/00 up to model year 2019 | Model 463 as of 12/1/00 up to model year 2019 | |
|---|---|---|---|---|
| BA91.60-P-1004-01B | Nut, control unit to body | Nm | 10 | 10 |
AIRBAG
| Number | Designation | Model 463 as of model year 2019 | |
|---|---|---|---|
| BA91.60-P-1004-01B | Nut, control unit to body | Nm | - |