Remove/Install Passenger Airbag Unit - AR91.60-P-0680GW

Model 463 

as of model year 2013 up to model year 2019 

/FACELIFT 2012 

Courtesy of MERCEDES-BENZ USA

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.	AS91.00-Z-0008-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Information, assessment and legal requirements when working with, handling and storing pyrotechnical components		AH91.00-Z-0000-10A
	Remove/install
1	Switch off ignition and remove transmitter key
2	Detach ground line from battery	Model 463 (except 463.234/236/241/242/248) as of model year 2013 up to model year 2019	AR54.10-P-0003GW
3	Remove instrument panel		AR68.10-P-1000GW
4	Release and disconnect electrical connector from squib at gas generator
5	Unscrew nut (1)
6	Remove both angle brackets
7	Remove screws (3)	Model 463 as of 12/1/00 as of model year 2013 up to model year 2019Bolt/nut, front passenger airbag to instrument panel	*BA91.60-P-1002-01B
8	Remove grab handle from instrument panel
9	Remove bolts (4)	Model 463 as of 12/1/00 as of model year 2013 up to model year 2019Bolt/nut, front passenger airbag to instrument panel	*BA91.60-P-1002-01B
10	Remove front passenger airbag with bracket (2)
11	Pull front passenger airbag out of bracket (2)
12	Install in the reverse order
	Check
13	Check and erase vehicle fault memory using the diagnostic vehicle diagnosis system	When replacing the front passenger airbag.
			AD00.00-P-2000-04A