Remove/Install Cover On Front Seat Cushion - AR91.18-P-1801XG

Model 463 

as of model year 2019 

Fig 1: Front Seat Cushion Cover Components Location - Model 463 As Of Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove seat cushion.		AR91.10-P-3310XG
2	Detach cover (1) from padding (2).
3	Unclip staple wires (3) from catch hooks (arrows).	Dismantling tool	Fig 2
4	Remove cover (1) from padding (2).
	Install
5	Align cover (1) over padding (2) so that the seams are located in the notches of the padding (2).
6	Clip staple wires (3) into padding (2).	Dismantling tool	Fig 2
7	Slip cover (1) over the padding (2).
8	Install seat cushion.		AR91.10-P-3310XG

Fig 2: Identifying Dismantling Tool (205 589 03 63 00)

Courtesy of MERCEDES-BENZ USA