(Operating The Deployment Device - AR91.60-P-0611-04A)

MODEL 163, 168, 170, 202, 203, 208, 209, 210, 215, 220, 230, 240, 414, 461  

MODEL 463 up to Model Year 2013 / /Facelift 2012 

	Risk of injury  caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag unit with deployment face up, do not subject to temperatures above 100 °C. When working on these units, disconnect the power supply.	AS91.00-Z-0001-01A
	Risk of injury  caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Model 124, 129 up to 30.6.93, 140, 202 up to 30.6.93 Store airbag unit with deployment face up, do not subject to temperatures above 100 °C. When working on these units, disconnect power supply and unplug the SRS test connector (X11/13).	AS91.00-Z-0001-01B
	Notes on controlled deployment of airbag, sidebag and emergency tensioning retractor units	Model 163, 168, 170, 202, 203, 208, 209, 210, 215, 220, 230, 240, 414, 461, 463	AH91.60-P-0611-02P
	Notes on disposing of airbag and emergency tensioning retractor units	All models	OS91.00-P-0001-01A

For testing arrangement, turn rotary switch of deployment device to position	Cable set plug, no. Up to 6/93	Cable set plug, no. from 7/93	Test procedure	Press: Buttons	Specified value: LED		Possible causes for deviation from specified value
1			Internal battery test	Press Deployment device not connected	Green Indicator lamp	ON	Replace ignition device battery set if necessary: 2 baby cells (2x1.5 V)
						ON
1	3+4	10+11	Actuation of driver side squib	Press both pushbuttons	1. Before actuation	ON	Triggering circuit is defective
2	1+2 3+4	1+2 3+4	Deployment of emergency tensioning retractor squib, left seat Deployment of emergency tensioning retractor squib, right seat	Press both pushbuttons	Deployment makes a bang		Triggering circuit is defective
3	5+6	13+14	Ignition Front passenger squib	Press both pushbuttons	2. After deployment Green Indicator lamp	ON	Triggering circuit is defective
						ON