Risk Of Injury From Cuts Or Abrasions On Sharp-edged Vehicle Parts - AS00.00-Z-0017-01A

Model all 

Risk of injury 

When working on body, superstructure, assembly and chassis parts that are not deburred due to the manufacturing process: Injuries can occur from cutting, rubbing or scraping on the non-deburred ridge.

Always wear protective gloves when working on or in the area of sharp, deburred vehicle parts. Deburr repair panels. 

Code of conduct / protective measures 

• Wearing safety gloves.
• Deburr repair sheets and machined cut edges.
• Protect against contact with sharp-edged components