Remove/Install Bottom Paneling For Dashboard On Passenger Side - AR68.10-P-1502XG
Model 463
as of model year 2019
| Remove/install | |||
| 1 | Move front passenger seat to end position toward rear. | ||
| 2 | Open rotary catch (2). | ||
| 3 | Unclip trim (1) from brackets (3). | ||
| 4 | Lower trim (1) until the electrical connector of the footwell lamp (E17/15) is accessible. | ||
| 5 | Disconnect electrical connector from the footwell lamp (E17/15). | ||
| 6 | Remove trim (1). | ||
| 7 | Change footwell lamp (E17/15). | When replacing trim (1). | |
| 8 | Install in reverse order. |