(Using Fixing Mounts And Templates - AR68.20-P-2030-02J)
Model 463 as of 5/1/91
as of model year 1991 up to model year 2010
Bottom cover
Cover can only be processed with the new clamping and milling-machine table SFT 3/140.
In the case of cutouts in the center switch level with FU7/463 and FD6/140, the extended milling cutter Ø 5X90 included in the scope of delivery must be used. The max. milling depth per milling cut should not be >2 mm.