(Using Fixing Mounts And Templates - AR68.20-P-2030-02I)
Model 463 up to 4/30/91
up to model year 1991
Bottom cover
The cover can be processed only with the new clamping and milling table SFT 3/140.
For cutouts in the center switch level with FU7/463, either suitable spacer blocks or a suitable spacer frame must be placed between the wood surface of the cover and the milling table. The milling cutter with a diameter of 5 X 90 must be used here. The maximum cutting depth per milling cut should not exceed 2 mm.