Remove/Install Sensors For Blind Spot Assist - AR54.71-P-0100GW
Model 463
as of Model year 2013 up to Model year 2019 /Facelift 2012
Fig 1: Sensors For Blind Spot Assist Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019 /Facelift 2012
| Remove/install | |||
| 1 | Switch off ignition | ||
| 2 | Remove bumper corners (1) at rear | Remove/install rear bumper corners | AR88.20-P-0010GW |
| 3 | Detach bracket (3) and lift left rear bumper intelligent radar sensor (B29/4) or right rear bumper intelligent radar sensor (B29/5) and slide in direction of arrow out of bracket (2) | ||
| 4 | Install in the reverse order | ||
| 5 | Read out and erase the fault memory using Star Diagnosis | ||
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A |