Deactivate Transport Mode Using Key Combination - AR54.00-P-0001-01XG

Model 463 

as of Model year 2019 

Deactivation 

The hazard warning system must be switched off at the start of the procedure. Do not press the brake pedal throughout the entire procedure.

1. Place the transmitter key inside the vehicle.
2. Press Start button once.

   Circuit 15 R is switched.

3. Switch on left turn signal indicator.

   Run for at least two blinking cycles.

4. Switch on right turn signal indicator.

   Run for at least two blinking cycles.

5. Switch off turn signal indicator.
6. Switch on hazard warning lights.

   Run for at least two blinking cycles.

7. Switch off hazard warning lights.
8. Switch on left turn signal indicator.

   Run for at least two blinking cycles.

9. Switch on right turn signal indicator.

   Run for at least two blinking cycles.

10. Switch off turn signal indicator.
11. Switch on ignition and check if the message "Transport mode" is shown on the instrument cluster.

    ↓

    If the message is still shown.

    ↓

    Repeat deactivation process.