(Shop-Fabricated Wiring Harness - AN54.65-P-0010-06A)

MODEL 463 up to production date 9/1/96 

Backup assist

Courtesy of MERCEDES-BENZ USA

1. Cut cable (0.75 mm² ):

   Cable color grey/yellow  L1) = 1.5 m long

   Cable color brown/white  L9) = 1.6 m long

   Cable color brown  L4) = 1.1 m long

2. Assemble grey/yellow and brown/white 2 x 0.9 m insulation sleeving (L5) and attach plug for BA control module (N62).

   The end of the cable to reverse lamp (E7) remains bare.

3. Provide cable (grey/yellow) with 1 x 0.4 m insulation sleeving (L6) and 1 x 0.9 m insulation sleeving (L7).
4. Plug cable (brown and brown/white) into plug for backup assist cutoff microswitch (X58s2).
5. Provide brown cable with 1 x 1.0 m insulation sleeving and attach cable shoe for ground (frame) (W30).