Wiring Diagram Of Reversing Camera - PE54.65-P-2103-97DDA
Model 213 as of model year 2021 with code 218 (Rear view camera) Control unit N66/2
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 48L |
| A26/17 | Head unit | 16L |
| CAN HMI | User interface CAN | 11K |
| Code 235 | Parking Pilot | 18A |
| Code FS | STATION WAGON | 8E |
| Code FV | LONG SEDAN | 6E |
| Code FW | SEDAN | 6E |
| K40/5 | Rear fuse and relay module | 6L |
| K40/5f468 | Fuse 468 | 5L |
| M35/2 | Rear camera cover motor | 21L |
| N10/8 | Rear SAM control unit | 21A |
| N66/2 | Backup camera control unit | 5A |
| N66/2 | Backup camera control unit | 13A |
| N66/2 | Backup camera control unit | 28A |
| N66/2 | Backup camera control unit | 44A |
| N66/2x1 | Reversing camera control unit electrical connector 1 | 2E |
| N66/2x2 | Reversing camera control unit electrical connector 2 | 14E |
| W6 | Left wheel arch trunk ground point | 7G |
| W8/1 | Left tailgate ground point | 9G |
| X30/20 | User interface CAN (CAN HMD potential distributor electrical connector | 11L |
| Z6/1z3 | Circuit 31 connector sleeve | 9F |
| Z6/30z3 | Circuit 31 connector sleeve | 7F |