Remove/Install Instrument Cluster - AR54.30-P-6015LWE

Model 213, 238 

Courtesy of MERCEDES-BENZ USA

Shown on model 213 except code 464 (Digital instrument cluster, full display) 

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Perform initial startup of instrument cluster (A1)	When replacing the instrument cluster (A1).
		Model 238	AD00.00-P-2000-06LWO
		Model 213	AD00.00-P-2000-04B
2	Remove display module	Model 213, 238 with code 464 (Full display digital instrument cluster) The instrument cluster (A1) is part of the display module and it cannot be separately removed or replaced.	AR54.30-P-6023LWE
3	Remove screws/bolts (1, 5)	Model 213, 238 except code 464 (Full display digital instrument cluster)
4	Remove bracket (2)	Model 213, 238 except code 464 (Full display digital instrument cluster)
5	Unclip instrument cluster (A1) from retaining clips (3, 4) and remove	Model 213, 238 except code 464 (Full display digital instrument cluster) Check that instrument cluster (A1) is correctly seated in retaining clips (3, 4).
6	Install in the reverse order