Navigation Telematics Services, Basic Function - GF82.85-P-9907A

Model all (CAR) 

with code 362 (HERMES communications module LTE) 

with code 365 (Hard drive navigation) 

Model all (CAR) 

with code 365 (Hard drive navigation) 

with code 383 (RAMSES ENTRY communication module) 

Model all (CAR) 

with code 365 (Hard drive navigation) 

with code 384 (RAMSES HIGH communication module) 

Model all (CAR) 

with code 498 (Japanese version) 

Overview 

This document contains information on:

• Real-time traffic data
• Integration of apps into navigation
• Local license plate restrictions
• Vehicle Information and Communication System (VICS)

General 

The telematics services for navigation provide the user with additional information for the navigation system.

Function requirement 

• The corresponding services are activated.

Real-time traffic data 

Current and accurate real-time traffic data are generated from anonymized, cyclic location messages from vehicles. These are transmitted via the telematics services control unit to the multimedia system controls of the participating vehicles. The received traffic data are used for route calculation. The vehicle requests current traffic data cyclically every 2 minutes.

Additional function requirements:

• Valid subscription
• The vehicle is in a country for which the Service Center offers the traffic data service.

If the user does not want his vehicle to transmit position data for Live Traffic Information, he can have vehicle data transmission deactivated at a Mercedes-Benz Service Center. In this case, he can no longer use the Live Traffic Information service.

Integration of apps into navigation 

The multimedia system integrates information from various applications into the navigation system, e.g.:

• Weather
• Local Search
• Parking Space Finder
• Gas Station Prices
• "Send2Car" (transmission of points of interest and routes to the multimedia system control)

Local license plate restrictions 

The local license plate restrictions function is currently only available for vehicles with China version.

The Service Center receives information about restrictions for vehicles with certain license plates. Before the restrictions come into force, the Service Center informs the user about the restricted areas and times by means of a push notification or email message.

The restricted areas and the warnings are also displayed in the multimedia system.

Vehicle Information and Communication System (VICS) 

The Vehicle Information and Communication System function is currently only available for vehicles with Japan version.

For dynamic route guidance, the Dedicated Short-Range Communications control unit receives various traffic messages. The multimedia system control decodes the traffic messages, which are then saved and processed by the navigation system.

Examples of traffic messages:

• Warning of obstructions
• Information on traffic conditions
• Warning of lane restrictions
• Schematic traffic diagrams
• Messages from catastrophe early warning system (e. g. earthquake and tsunami warnings)

  Corresponding antennas are installed in the vehicle for the exchange of VICS data in the 5.8 GHz frequency range and the reception of infrared signals. The antennas receive VICS information, e.g. from VICS beacons installed at the side of the road (transmission masts). Additional function requirements:

• Circuit 15R on

	Further basic function
	Multimedia system control, basic function		GF82.85-P-9904A
	Control units
	Telematics services control unit, basic function	Vehicles with code 362 (HERMES - LTE communication module), with code 383 (RAMSES ENTRY communication module) or with code 384 (RAMSES HIGH communication module)	GF82.85-P-9892A