Data Sheet For Measuring Inclination Angle, Form - OF41.10-P-3000-01A
Model 117, 156, 176, 246
with code M005 (Vehicles with 4MATIC/all-wheel drive)
Model 118, 177, 247
with code M005 (Vehicles with 4MATIC/all-wheel drive)
Model 166, 167, 171, 172, 203, 204, 205, 207, 209, 211, 212, 213, 215, 216, 218, 219, 220, 230, 238, 253, 257, 290
Model 170, 208, 210 with transmission 716.6
Model 217, 221, 222, 223
with 2-piece propeller shaft
| Company-owned sales and service outlet/Agency - Dealer no. | Customer | |||
| Vehicle identification number | Repair job no. | |||
| Tester: Name | Date | |||
| License plate number | Initial registration | Model | Engine no. | Odometer reading: km/miles |
| Complaint or reason for articulation angle measurement | ||||
| Before correction (□) | Specified values | After correction (X) | |
|---|---|---|---|
| Difference ∠1 (dec. °) | |||
| Difference ∠2 (dec. °) | |||
| Difference ∠3 (dec. °) |
| Value | ∠1 | ∠2 | ∠3 |
|---|---|---|---|
| 1.0 | |||
| 0.8 | |||
| 0.6 | |||
| 0.4 | |||
| 0.2 | |||
| 0.0 | |||
| -0.2 | |||
| -0.4 | |||
| -0.6 | |||
| -0.8 | |||
| -1.0 | |||
| -1.2 | |||
| - = Upper tolerance limit | --= Lower tolerance limit | □ = Before correction | x = After correction |