Remove/Install Rear Panoramic Roof Roller Sun Blind - AR77.21-P-0201LWE

Model 213 

with code 413 (Automatic panoramic sliding sunroof) 

Model 290 

with code 416 (Panoramic sunroof) 

Courtesy of MERCEDES-BENZ USA

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Remove/install
1	Lower roof lining and lay down in vehicle interior.	Model 290 with code 416 (Panoramic sunroof)	AR68.30-P-4300FRX
		Model 213.0/1 with code 413 (Automatic panoramic sliding sunroof)	AR68.30-P-4300LWE
		Model 213.2 with code 413 (Automatic panoramic sliding sunroof)	AR68.30-P-4300LWS
2	Unscrew bolts (2).
3	Remove roller sunblind (1) with guide rails (3) and take out of the vehicle.	Helper required.
4	Pull left and right drive cable guide tube (4) out of the guide rails (3).	When replacing roller sun blind (1).
5	Remove screws (5) and remove guide rails (3) from roller sun blind (1) (arrow).	When replacing roller sun blind (1).
6	Install in the reverse order