Remove/Install Rear Floor Covering - AR68.20-P-4800LWE
Model 213
Shown on right side of vehicle
| Remove/install | |||
| 1 | Remove door sills in rear | AR68.30-P-4100LW | |
| 2 | Remove front seats | AR91.10-P-1000LW | |
| 3 | Remove seat cushion in rear | Model 213 with code 248 (Rear seat with integrated child seat) | AR91.12-P-1020LWA |
| Model 213 except code 248 (Rear seat with integrated child seat) | AR91.12-P-1020LW | ||
| 4 | Guide rear floor covering (1) out below IB-pillar paneling | Fig 2 | |
| 5 | Unclip retaining clip (3) from cover (2) | Fig 1 | |
| 6 | Unclip cover (2) at front and move out toward front (arrow A) | ||
| 7 | Open stowage compartment (5) on center console and fold up insert (6) | ||
| 8 | Unscrew nuts (7) | ||
| 9 | Lift center console and guide out rear floor covering (1) | ||
| 10 | Guide electrical wiring harness through rear floor covering (1) and remove rear floor covering (1) | ||
| 11 | Install in the reverse order |