Instrument cluster (IC), operating information - GF54.30-P-0002-05CAM

MODEL 207.3/4 as of model year 2014 

Operating instructions 

Via the left multifunction steering wheel button group (S110) and right multifunction steering wheel button group (S111) various menu levels can be shown in the multifunction display (A1p13) of the instrument cluster (A1):

• The system selection button (S110s3) can be used to scroll through the vehicle menus.
• It is possible to scroll within a menu in the submenus or in lists using the scroll forward and back button (S110s1).
• The "Back" and voice control system off button (S110s4) can be used in each menu or submenu to jump into the next higher menu level.
• The OK button. (S110s6) enables each selection or a pending message to be confirmed.

All the buttons of the multifunction steering wheel button group are always installed. However, activation of the corresponding functions depends on the equipment installed in the vehicle.

Overview of available menus (equipment-dependent):

• "Trip" menu 
• "Navi" menu 
• "Audio" menu 
• "Tel" menu 
• "Assist." menu 
• "Service" menu 
• "Settings" menu 

"Trip" menu 

The following functions can be selected in the "Trip" menu:

• Show standard display or reset trip distance
• Show or reset trip computer "After start"
• Show or reset trip computer "After reset"
• Show range and current consumption indicator
• Display digital speedometer
• Display digital speedometer with gearshift recommendation (with transmission 711, 716)
• "ECO Score" (driving style analysis) display (as of 01.06.2012 except engine 276, 278, 642 with CODE M014 (Uprated engine), except engine 651 without CODE B03 (ECO start/stop function))

"Navi" menu 

Navigation notes are displayed in the "Navi" menu when the function is switched on. When the function is switched off, the direction of travel is indicated using the cardinal points of the compass, e.g. "Direction of travel NW".

"Audio" menu 

The following functions can be selected in the "Audio" menu:

• Select radio station
• Operate CD player/CD changer/DVD changer/DVD audio/MP3
• Operate DVD video
• Operate TV

"Tel" menu 

The name of the selected mobile telephone network is shown in the telephone menu when the function is switched on. It is still possible then to scroll through the stored telephone book and select an entry. When the function is switched off the text "Telephone Off" is displayed.

"Assist." menu 

The following functions can be selected in the "Assist." menu, depending on the equipment installed:

• Assist graphic (status indication of driver assistance systems)
• "Traffic Sign Assist" (with CODE 513 (Traffic sign recognition))
• Switch "ESP" to active or passive
• "Steer Assist" ON or OFF (with CODE 266 (Steer Assist))
• Show "distance chart" (with CODE 233 (DISTRONIC PLUS))
• "PreSafe brake" ON or OFF (with CODE 271 (Autonomous brake intervention/pedestrian protection) or with CODE 300 (Collision reduction (CMS)))
• "Blind Spot Asst." ON or OFF (with CODE 237 (Active Blind Spot Assist))
• Switch "Attention Asst." on/off
• "Lane Keeping Asst." ON or OFF (with CODE 238 (Active Lane Keeping Assist))

"Service" menu 

The following functions can be selected in the "Service" menu:

• Call up display messages
• Tire pressure loss warning (without CODE 475 (Tire pressure monitor (premium), Schrader)) or tire pressure monitor (with CODE 475 (Tire pressure monitor (premium), Schrader))
• Service interval indicator "ASSYST PLUS"

"Settings" menu 

Changes to the following settings can be made in the "Settings" menu:

• "Instrument cluster"
• Lights
• "Vehicle"
• "Comfort"
• "Manufacturer default setting"
• "Time/date" (without CODE 512 (COMAND APS incl. DVD changer), without CODE 527 (COMAND APS with single DVD drive (with navigation)) and without CODE 531 (COMAND APS))