Remove/install Digital Audio Broadcasting control unit (DAB) - AR82.60-P-2001ECA
MODEL 207.4 as of 3/1/12 with CODE 537 (Digital radio (DAB))
Shown on vehicle with code (036) TIREFIT and code (865) Digital TV tuner
Fig 1: Identifying Digital Audio Broadcasting Control Unit Remove/Install Components - Shown On Vehicle With Code (036)
| Remove/install | |||
| Notes on avoiding damage to optical fibers during repair work | AH82.60-P-0001-05AK | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Temporarily store basic data of Digital Audio Broadcasting control unit (N87/3) in Star Diagnosis | Only when replacing the Digital Audio Broadcasting control unit (N87/3) | |
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| 2 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | ||
| 3 | Remove trunk floor paneling | ||
| 4.1 | Remove spare wheel from spare wheel well | Only on vehicles with code (690) Emergency spare tire (minispare) | |
| 4.2 | Remove clips (2) and remove stowage compartment for Tirefit (3) | Only on vehicles with code (036) TIREFIT | |
| 5 | Detach spare wheel well cover (1) and remove from vehicle | ||
| 6 | Unclip wiring harness with optical fiber (4) at Digital Audio Broadcasting control unit (N87/3) | Only on vehicles with code (865) Digital TV tuner | |
| 7 | Disconnect electrical connector (5) and electrical connector with optical fiber (6) at Digital Audio Broadcasting control unit (N87/3) | ||
| 8 | Unscrew nuts (7) | ||
| 9 | Remove Digital Audio Broadcasting control unit (N87/3) with bracket (8) from spare wheel well | ||
| 10 | Unscrew nuts (9) and remove bracket (8) from Digital Audio Broadcasting control unit (N87/3) | ||
| 11 | Install in the reverse order |