Remove/install Digital Audio Broadcasting control unit (DAB) - AR82.60-P-2001EC
MODEL 207.3 with CODE (537) Digital radio
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on avoiding damage to fiber optic cables during repair work | AH82.60-P-0001-05AK | ||
| 1 | Temporarily store basic data of Digital Audio Broadcasting control unit (N87/3) in STAR DIAGNOSIS | When replacing the Digital Audio broadcasting control unit (N87/3). |
|
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| 2 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | KEYLESS-GO start/stop button only on vehicles with code (889) Keyless-Go. | |
| 3 | Remove trunk floor paneling (1) | ||
| 4 | Remove screws (3) and remove anchoring lugs | ||
| 5 | Pull cover on carrier plate (2) to rear and remove | ||
| 6 | Detach electrical connector (8) and electrical connector with fiber optic cable (10) | ||
| Notes on avoiding damage to fiber optic cables during repair work | With Media Oriented System Transport (MOST) | AH82.60-P-0001-05AK | |
| 7 | Expose electrical wiring harness (7, 9) on bracket (5) | ||
| 8 | Remove bolts (11) | ||
| 9 | Unclip holder (5) (arrows A) and remove from carrier plate (6) with Digital Audio Broadcasting control unit (N87/3) | ||
| 10 | Unscrew nuts on underside of holder (5) and remove Digital Audio Broadcasting control unit (N87/3) | When replacing bracket (5) or Digital Audio Broadcasting control unit (N87/3). | |
| 11 | Install in the reverse order |