Adjust headlamps - AR82.10-P-4735CW
MODEL 172.4, 204, 207, 212, 218, 246
| 1 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | ||
| Risk of death due to high voltage in xenon headlamps. Risk of explosion /risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components at xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by toxic salts and mercury compounds being ingested or coming into contact with skin | Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the hazard area. Ensure sufficient ventilation in the working area. | AS82.10-Z-0001-01A | |
| 2 | Adjust headlamps | Not on model 204.0/2 as of AJ 11/1 with halogen headlamp, not on model 204.3 with halogen headlamp, not on model 246 with halogen headlamp | |
| Adjusting headlamps when driving abroad | AH82.10-P-0001-01A | ||
| 3 | Check headlamp adjustment | ||
| Model 172 with halogen headlamps | AP82.10-P-8260V | ||
| Model 204.9, Model 204.0/2 up to AJ 11/1 with halogen headlamp, Model 204.0/2 up to AJ 11/1 with bi-xenon headlamps | AP82.10-P-8260CW | ||
| Model 207, 212 with halogen headlamps Model 218 with bi-xenon headlamps |
AP82.10-P-8260EW |