Remove/Install Seat Side Bolster For Backrest In Rear - AR91.12-P-1711LWT

Model 213.2 

Shown on right side of vehicle 

Fig 1: Seat Side Bolster For Backrest In Rear Components Location - Model 213.2 (Shown On Right Side Of Vehicle)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove seat cushion in rear	Model 213.2 except code 248 (Rear seat with integrated child seat)	AR91.12-P-1020LW
		Model 213.2 with code 248 (Rear seat with integrated child seat)	AR91.12-P-1020LWA
2	Remove screw/bolt (2) and hang belt end fitting to one side (3)	Bolt, rear belt end fitting	*BA91.40-P-1005-01U
3	Unclip and remove seat side bolster ('1)	: Ensure correct seating of seat side bolster (1) in mount (4).
4	Install in the reverse order

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 213
BA91.40-P-1005-01U	Bolt, rear belt end fitting	Nm	35