Disconnect/Connect Engine Wiring Harness To Remove Left Cylinder Head Cover - AR01.20-P-5013-01MNE
Engine 177 in model 213
METRIC SCREWS/BOLTS AND NUTS AS PER MBN 10 105, 10 143
| Number | Designation | 8.8 | 10.9 | |
|---|---|---|---|---|
| BA00.10-P-1002-04A | M6 X 1 | Nm | 9 | 13 |
GROUND STRAP
| Number | Designation | Engine 177 | |
|---|---|---|---|
| BA15.10-P-1003-05F | Bolt, engine wiring harness ground to cylinder head cover | Nm | 9 |
ENGINE WIRING HARNESS
| Number | Designation | Engine 177 | |
|---|---|---|---|
| BA15.18-P-1003-01G | Screw, cable duct to cylinder head cover/charge air cooler/heat shield, right | Nm | 9 |
- Release and disconnect electrical connector of right purging pressure sensor (B108/2).
- Release and disconnect electrical connector of left purging pressure sensor (B108/1).
- Release and disconnect electrical connector of left exhaust camshaft Hall sensor (B6/6).
- Release and disconnect electrical connector of left intake camshaft Hall sensor (B6/4).
- Release and disconnect electrical connector of cylinder 5+6 ignition coil (T4/2).
- Release and disconnect electrical connector of cylinder 7+8 ignition coil (T4/3).
- Release and disconnect electrical connector of left lambda sensor downstream of catalytic converter (G3/5x1).
- Unclip holder for electrical connectors (G3/5x1, G3/2x1).
- Release and disconnect electrical connector of left lambda sensor upstream of catalytic converter (G3/3x1).
- Release and disconnect electrical connector of cylinder 8 exhaust CAMTRONIC actuator (Y49/18).
- Release and disconnect electrical connector of cylinder 8 intake CAMTRONIC actuator (Y49/17).
- Release and disconnect electrical connector of cylinder 5 exhaust CAMTRONIC actuator (Y49/16).
- Release and disconnect electrical connector of cylinder 5 intake CAMTRONIC actuator (Y49/15).
- Release and disconnect electrical connector of left fuel pressure and temperature sensor (B42/2).
- Release and disconnect electrical connector of left charge air temperature sensor (B17/14).
- Release and disconnect electrical connector of pressure sensor downstream of left throttle valve (B28/22).
- Release and disconnect electrical connector of pressure sensor upstream of left throttle valve (B28/20).
- Release and disconnect electrical connector of left intake camshaft adjustment solenoid (Y49/4).
- Release and disconnect electrical connector of left exhaust camshaft adjustment solenoid (Y49/6).
- Release and disconnect electrical connector of fuel high-pressure pump (20).
- Unclip electrical connector (21) from cylinder head cover.
- Release and disconnect electrical connector (21).
- Release and disconnect electrical connectors of cylinder 5 to 8 fuel injectors (Y76/5, Y76/6, Y76/7, Y76/8).
- Remove screw (19)
.
- Remove screw/bolt (22)
.
- Remove screws/bolts (23)
.
- Connect in reverse order.