Restart Tire Pressure Monitor (TPM) - AR54.30-P-1001-01LWE

Model 213, 238 

with code 475 (Tire pressure monitoring system) 

1. Correct tire pressure at wheels on front and rear axle.
2. Switch on ignition.
3. Call up "Accept current pressure values as guideline values" menu in multifunction display.

   Service →

   Tire pressure →

   Use current pressure values as guideline values.

4. Confirm "Accept current pressure values as guideline values".

   A "Tire pressure monitor restarted" message is shown on the instrument cluster. After a few minutes' driving the tire pressures are displayed and monitored.

5. Switch off ignition.