Remove/Install Wiper Arms - AR82.30-P-6100-03LWE

Model 205, 206, 213, 253, 293, 297

Model 238

except Code 874 (MAGIC VISION CONTROL incl. Heated windshield washer)

Risk of injury by clamping or crushing, in extreme cases by shearing off limbs when interfering with the windshield wiper mechanism

When working on the windshield wiper mechanism, always switch off the ignition and keep the transmitter key outside the transmitter range (at least 2 m).

AS82.30-Z-0001-01A

WINDSHIELD WIPERS

Number	Designation		Model 205	Model 206
BA82.30-P-1001-01M	Nut on wiper arm	Nm	30	30

WINDSHIELD WIPERS

Number	Designation		Model 213	Model 253
BA82.30-P-1001-01M	Nut on wiper arm	Nm	30	30

WINDSHIELD WIPERS

Number	Designation		Model 293
BA82.30-P-1001-01M	Nut on wiper arm	Nm	30

WINDSHIELD WIPERS

Number	Designation			Model 297
BA82.30-P-1001-01S	Nut wiper arm to windshield washer	M10	Nm	30

Fig 1: Identifying Printing Piece M 10X1, (210 589 04 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Pullers (001 589 38 33 00)

Courtesy of MERCEDES-BENZ USA

Disassemble

Remove cover caps (3, 4).
Remove nuts (5).
Wiper arms (1, 2) with the Puller and Loosen and remove the pressure piece from the windshield wiper system.
Install
Place the wiper arms (1, 2) on the drivers of the windshield wiper system.
Position the wiper arms (1, 2) using the window markings.
Screw on nuts (5) models 205, 206, 213, 253, 293 Model 297 .
Install cover caps (3, 4).

Courtesy of MERCEDES-BENZ USA