LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2017 >> E300 Base >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft - 213 Chassis >> Testing & Repair >> Press Rubber Mount With Grooved Ball Bearing Onto Linkage Arm - AR41.10-P-0100-05LW

Press Rubber Mount With Grooved Ball Bearing Onto Linkage Arm - AR41.10-P-0100-05LW

Model 205, 213, 238, 253 

G07320938Courtesy of MERCEDES-BENZ USA
  1. Press elastomer bearing with grooved ball bearing (7) onto joint fork of rear half of propeller shaft using SPECIAL TOOL drift (05).

    IMPORTANT The open side of the grooved ball bearing (7) must face downwards.

    G07070365Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals