Press Grooved Ball Bearing In/Out Of Elastomer Bearing Of Propeller Shaft - AR41.10-P-0100-03OLC

Model 213, 238 

Courtesy of MERCEDES-BENZ USA

1. Press out grooved ball bearing (8) out of elastomer bearing (7b) using press out/in tool (04a, 04b).

   Press out 

   Courtesy of MERCEDES-BENZ USA

2. Press in grooved ball bearing (8) into the bearing seat that is lined with rubber up, to the contact surface (arrows) using press out/in tool (04a, 04b).

   Ensure that the grooved ball bearing (8) is properly seated.

   Press in 

   Courtesy of MERCEDES-BENZ USA