Assess Condition Of Brake Linings - AP42.10-P-4252E

Model 213 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

	Risk of injury.  Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Notes on repairs to brake system		AH42.00-P-0003-01A
	Notes on handling, transport and storage of composite brake disks		AH42.10-P-9406-12LF
	Notes on handling, transport and storage of ceramic brake disks		AH42.10-P-9406-13A
	Check
1	Assess bake lining thickness (1) of brake linings at front axle	If necessary, use a flashlight (2) or a mirror (3). The thickness of the pad backing plate can be used as a guide when assessing brake lining thickness (1). Front axle. Brake lining If, in exceptional cases, assessment by means of visual inspection is not possible. ↓ Detach wheel and tire assemblies and inspect them, subject to separate repair order.	*BE42.10-P-1001-06C
2	Assess bake lining thickness (1) of brake linings at rear axle	If necessary, use a flashlight (2) or a mirror (3). The thickness of the pad backing plate can be used as a guide when assessing brake lining thickness (1). Rear axle. Brake pad If, in exceptional cases, assessment by means of visual inspection is not possible. ↓ Detach wheel and tire assemblies and inspect them, subject to separate repair order.	*BE42.10-P-1001-18A
3	Determine likely remaining distance of brake linings	If the wear limit for the brake linings is reached, replace the brake linings subject to a separate repair order. Otherwise the braking effect may be impaired and people, property and environmental damage may result! To determine the prospective remaining distance for each axle, refer to the brakepad with the least brakepad thickness (1). In order to avoid an unscheduled workshop visit between services, determine the remaining distance of the present brakepads. If the remaining distance determined is less than the next service interval, advise the customer to replaced the brakepads before the due service date.	AP42.10-P-4253-03EW

CHECK VALUES FOR FRONT AXLE BRAKE LINING

Number	Designation			Model 213 (except 213.088/089/288/289)	Model 213.088/089/288/289
BE42.10-P-1001-06C	Brake lining	Brake pad, new	mm	13	10
		Pad backing plate	mm	6	6
		Wear limit	mm	2	2
		Wear indicator activated (if installed)	mm	2-3	2-3

CHECK VALUES FOR REAR AXLE BRAKEPAD

Number	Designation			Model 213 (except 213.088/089/288/289) Model 213.088/089/288/289 except code B07	Model 213.088/089/288/28 9 with code B07
BE42.10-P-1001-18A	Brake pad	Brake pad, new	mm	11	12
		Pad backing plate	mm	6	6
		Wear limit	mm	2	2
		Wear indicator activated (if installed)	mm	2-3	2-3