Remove/Install Rear Center Section Cover - AR68.30-P-4786LWT
Model 213.2
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notes on sensor system for trunk lid opening/closing | Model 213.2 with code P17 (KEYLESS-GO package) | AH80.61-P-0001-01A | |
| Remove/install | |||
| 1 | Fold over load compartment floor rear section (2) | ||
| 2 | Remove bolts (3) | ||
| 3 | Remove retaining clips (4) | ||
| 4 | Unclip rear center section paneling (1) and remove | ||
| Fig 1 | |||
| 5 | Install in the reverse order |